How do I set up the Simplified MFG SP12S HDMI splitter?

[DelEmmett]

Setting up your Simplified MFG SP12S HDMI splitter is straightforward. Here's a step-by-step guide:

1. Connect Input Device: Using an HDMI cable, plug the HDMI output from your source device (like a cable box or gaming console) into the input port of the SP12S.
2. Connect Output Devices: Connect up to four display devices (TVs, monitors) to the output ports of the splitter using HDMI cables. If you need separate audio, connect your audio devices to the L/R audio out (3.5mm) or optical out (S/PDIF) ports.
3. Power Up: Connect the provided 5V/1A power supply to the splitter and plug it into a power outlet.
4. Adjust Display Resolutions: Use the scaling switches on the splitter to adjust video signals for each output. You can set each output to 1080p or use the EDID setting for automatic adjustment, which is often the easiest option.
5. Audio Configuration: If you need to separate audio, use the optical SPDIF and 3.5mm mini jack for audio breakout.
6. EDID Management: The splitter lets you manage EDID (Extended Display Identification Data) settings. You can copy the EDID from output 1 or mix EDID settings as needed for the best compatibility.
7. Controls: Check the rear panel controls to adjust the settings and configurations based on your display requirements. Refer to the user manual for detailed information.

Following these steps will help you set up the Simplified MFG SP12S HDMI splitter correctly. For further assistance or any specific questions, contact Simplified MFG's sales or tech support.