How do I set up the Mafell F80 Guide Rail for bevel cuts?

[OJuliana]

Setting up the Mafell F80 Guide Rail for bevel cuts involves a few key steps to ensure accuracy and safety. First, prepare the splinter guard by cutting it to the correct size for your saw blade. Place the rail on a flat surface, set the cutting depth to about 3 mm, and the angle to 0 degrees. Turn on the circular saw and make a pass along the rail. The edge created on the splinter guard then serves as your guide for both straight and bevel cuts. You can connect multiple guide rails using the connecting piece F-VS. For bevel cuts, the sliding bevel F-WA is essential; it allows for angles between -45° and 60° and connects to any F guide rail using the connecting piece. To perform a bevel cut, set the desired angle on the F-WA, secure the locking device, align the sliding bevel with your workpiece, and make the cut. Consider these accessories to improve your workflow: the sliding bevel F-WA (Order No. 205357), clamps F-SZ100MM (Order No. 207770), and connecting piece F-VS (Order No. 204363). Also, rail bags and kits are available for storage and transport. Following these instructions, you'll be able to make precise bevel cuts with your Mafell F80 Guide Rail.