Setting up and personalizing your Weight Watchers WW701Y Digital Smart Bathroom Scale is straightforward. Here's a step-by-step guide: First, remove all packaging materials. Then, locate and remove the isolator tab from the battery compartment, which is usually found at the bottom or inside. If the display doesn't light up after removing the tab, you may need a screwdriver to remove the battery cover and then replace it. Tap the scale with your foot to turn it on, and the display should illuminate. Next, on the base of the scale, select your preferred unit of measurement, either pounds (lb) or kilograms (kg). Wait for the display to show "0.0" before proceeding. To personalize user data, press the "Set" button. Use the Up/Down buttons to choose a user number from P-01 to P-04, and confirm with "Set". The scale will then prompt you to set your height; use the Up/Down buttons to adjust, and press "Set". After height, set your age using the same Up/Down buttons and confirm with "Set". Finally, select your gender (male or female) with the Up/Down buttons and confirm with "Set". The scale will display your stored data, including user number, height, gender, and age, briefly. Your Weight Watchers WW701Y scale is now ready to use. Step onto the scale barefoot, ensuring your feet align with the electrodes (metal strips). The scale will display your weight, body fat percentage, body water percentage, bone mass value, and BMI. Note: Ensure "0.0" is displayed before stepping on. "Err" will display if there's improper foot contact or if you are wearing socks or shoes. If needed, moisturize your feet to ensure proper contact. Always consult the instruction manual for additional details and troubleshooting tips specific to your Weight Watchers scale.
