How do I set the timer on my MPC CALDO-I-BOX Infrared Heater?

[MacMaria]

Setting the timer on your MPC CALDO-I-BOX Infrared Heater is easy. Here's how to do it:

1. Activating the Timer:

   • Aim the remote control at the heater's receiver and press the "1 hr" button. The display will show "01," indicating the heater will enter Standby mode after one hour.
   • The heater will automatically switch to Standby mode after the set time, with a flashing red LED to signal this.

2. Setting a Specific Timer Duration:

   • To set a timer for a specific number of hours (up to 13 hours), use the number buttons on the remote. For instance, pressing "1 2 4 6" will set the timer for 13 hours.
   • The display will show the set timer duration, and the heater will go into Standby mode after the specified time.

3. Monitoring and Adjusting the Timer:

   • While the timer is active, the display shows the remaining time. For example, if you set a 13-hour timer and two hours have passed, the display will show "11."
   • The display alternates between showing the current power setting and the remaining timer duration.
   • To disable or change the timer, press the same button again to adjust or cancel the setting.

4. Safety Feature:

   • If the timer is not set, the heater will automatically switch to Standby mode after eight hours of continuous use. The display will flash "- -" to indicate Standby mode.

By following these steps, you can effectively manage the operation and energy use of your MPC CALDO-I-BOX Infrared Heater with its timer function.