How do I set the exposure time on my BASELAYR V2331 V-Series Exposure Unit?

[VanMargaret]

Setting the exposure time on your BASELAYR V2331 V-Series Exposure Unit is straightforward. The timer operation key, often color-coded orange, is key for this process. While the initial time is set at the factory, you can still fine-tune it. Here's how:

1. Timer Operation Key: This key is central to controlling the exposure time, with functions like key protect, control output, and reset.
2. Present Value Display: This main display shows the current timing status, with options for red, green, and orange color indicators.
3. Set Value Display: The sub-display, typically green, is where you'll see the time you're setting for your exposure.
4. Mode Key: Use this to switch between modes and adjust settings as needed.
5. Up and Down Keys: Use the up and down keys (labeled 1-4) to adjust the exposure time. These allow you to increase or decrease the time as needed.

For vacuum exposure units, there are three switches to the left of the timer:

• The first switch activates the exposure time.
• The second controls the yellow inspection lights.
• The third switch operates the vacuum pump.

To adjust the exposure time, use the up keys to input the desired minutes and seconds for your specific needs.