How do I select the canopy finish for the Progress Lighting One Light Pendant in Brushed Nickel?

[PeterLee]

Choosing the right canopy finish for your Progress Lighting P500386-193 One Light Pendant in Brushed Nickel is straightforward. The instruction manual provides three finish options: Brushed Nickel (009), Matte Black (31M), and Vintage Brass (163). Here’s how to choose and incorporate the canopy into the installation: First, after assembling the round mounting plate with screws and hex nuts, pass the wire through the cord bushing out of the canopy assembly. Next, adjust the cord length, and then tighten the strain relief securely. Then, strip 3/8" of insulation from the electrical wire ends and connect the WHITE fixture wire to the WHITE supply wire from the outlet box, and the BLACK fixture wire to the BLACK supply wire using wire nuts. Connect the fixture ground wire and supply ground wire. After that, choose your desired canopy finish and pass the wire through the cord bushing out of the canopy assembly. Secure the fixture to the screws using the two cylinder nuts and tighten them securely. Attach the shade by sliding the "U" slot onto the fixture and secure it tightly using the cord bushing. Finally, install a lamp (not included) into the fixture socket. Use a 100-watt MAX incandescent medium base lamp, SBCFL, or SBLED. Following these steps ensures you successfully choose and install the canopy finish of your Progress Lighting pendant.