How do I safely wire and ground the HINKLEY 30815 Cinema Wall Light?

[StColin]

Wiring and grounding your HINKLEY 30815 Cinema Wall Light correctly is crucial for safety. Here's a step-by-step guide:

Wiring Instructions:

Indoor Fixtures:

1. Connect the positive supply wire (typically black or smooth) to the positive fixture lead using an appropriately sized twist-on connector.
2. Connect the negative supply wire (typically white or ribbed) to the negative fixture lead.
3. Refer to the grounding instructions below to complete all electrical connections.

Outdoor Fixtures:

1. Connect the positive supply wire (typically black or smooth) to the positive fixture lead using an appropriately sized twist-on connector.
2. Connect the negative supply wire (typically white or ribbed) to the negative fixture lead.
3. Cover the open end of connectors with silicone sealant to create a watertight seal.
4. Seal any gaps between the fixture mounting plate and the wall using caulk to prevent water entry.

Grounding Instructions:

Flush Mount Fixtures:

1. Secure the fixture ground wire (typically copper or green) to the fixture mounting strap using the ground screw.

Chain Hung Fixtures:

1. Loop the fixture ground wire under the head of the ground screw on the fixture mounting strap.
2. Connect the loose end of the fixture ground wire directly to the building's ground wire using twist-on connectors.

Post-Mount Fixtures:

1. Connect the fixture ground wire to the power supply ground wire with an appropriately sized twist-on connector inside the post.
2. Cover the open end of the connector with silicone sealant to ensure a watertight seal.

Important Safety Note: Always turn off the power supply at the circuit breaker before starting any electrical work. If you're unsure about any step, consult a qualified electrician. Following these instructions carefully will help ensure a safe and proper installation of your HINKLEY 30815 Cinema Wall Light.