Replacing the batteries in your Princeton Tec VIZZ RGB Headlamp is straightforward. Here's a step-by-step guide:
-
Battery Compatibility: Your VIZZ RGB Headlamp operates on three AAA batteries. You can use Alkaline (LR03), Lithium, or rechargeable NiCad or NiMH batteries.
-
Battery Insertion: Carefully install the batteries, ensuring correct polarity. Incorrect battery placement may damage the headlamp and void the warranty. Avoid mixing new and used batteries, different battery brands, or battery types.
-
Waterproof Seal: The battery compartment has a waterproof seal. Keep this seal clean and free of harsh chemicals to maintain its waterproof integrity. Inspect and clean the seal each time you change the batteries.
-
Operating the Switch:
- To activate the light, press the switch once for Red light, twice for Green, three times for Blue, and four times to turn it off.
- Press and hold the switch for one second in any mode to activate White light.
- When in White light mode, press and hold the switch for dimming.
- Press the switch once after being in any mode for over a second to turn the light off.
- Hold the switch for five seconds to lock or unlock the light to prevent accidental activation.
-
Troubleshooting: If the light doesn't turn on, first check that the batteries are correctly installed. Replace the batteries if necessary. If the seal has been compromised, check for any water on the circuit board.
-
Performance: The runtime of your Princeton Tec VIZZ RGB Headlamp is measured from the initial light output with fresh batteries until it reaches 10% of the initial value. Reserve time is the duration from 10% down to 0.25 lux.
-
Warranty Information: Your Princeton Tec VIZZ RGB Headlamp is protected by a USA Lifetime Warranty or an International 10-Year Warranty. Contact customer service for any repairs or replacements.
