How do I replace the batteries in my PALLADIOM LBMRJ-C Wire-Free Roller Shade?

[SanMorgan]

To replace the batteries in your PALLADIOM LBMRJ-C Wire-Free Roller Shade, follow these steps:

1. Accessing the Battery Compartment:

   • Grasp the fabric roll near the motor end and gently pull it away from the bracket.
   • Push in and then upwards on the Battery Door to detach it from the shade.
   • This opens the Battery Sleeve for access.

2. Installing New Batteries:

   • Reach into the battery opening and carefully remove the Battery Sleeve.
   • Insert NEW 1.5 V Alkaline D-Cell batteries into the Battery Sleeve, ensuring correct polarity as indicated on the sleeve.
   • Slide the loaded Battery Sleeve back into the shade until it is fully inserted.

3. Battery Guidelines:

   • Always use NEW 1.5 V Alkaline D-Cell batteries. Avoid mixing battery brands or types.
   • Lutron recommends Duracell or RAYOVAC batteries.
   • Battery life depends on the shade size, fabric weight, and usage. Estimated battery life is determined by size and fabric choices.

4. Flexibility of Battery Sleeve:

   • If an obstruction prevents full removal of the Battery Sleeve, but has at least 3 inches (76 mm) of clearance from the Battery Door, the sleeve can be cut at designated points for flexibility.

5. Dealing with Close-Quarters Installations:

   • If the shade was mounted with less than 3 inches (76 mm) of space for removing the Battery Sleeve, you'll need to remove the shade from its brackets to change the batteries.

6. Removing the Shade from Brackets:

   • Extend the operator bracket Slide Ring, then press the Slide Ring release to detach the shade. Pull the idler end of the shade out of its bracket socket.

Carefully follow these instructions to ensure your PALLADIOM LBMRJ-C Wire-Free Roller Shade functions correctly.