How do I properly stack and light a fire in my KEMLAN CELESTIAL 900 Freestanding Fireplace with Fan for optimal heat and efficiency?

[HaydenFitz]

To get the most out of your KEMLAN CELESTIAL 900 Freestanding Fireplace with Fan, follow these steps for effective fire-building:

1. Fuel Selection is Key: Always use seasoned hardwood with a moisture content between 12% and 20%. Avoid timber that is either excessively dry or too wet, as this can affect burn duration and the heat produced.

2. Initial Burns Matter: The first few fires are crucial. They help season the fireplace, including the baffles, flue system, and the paint on the firebox. These initial burns help establish the right airflow and create an ash bed for efficient operation.

3. Building Your Fire: Fill the firebox from front to back and side to side with a mix of kindling, firelighters, and hardwood. Distribute these materials evenly to ensure even heat throughout the firebox.

4. Primary Air Control: Start with the primary air slide fully open. This setting provides maximum oxygen to the fuel, leading to a quick and efficient fire.

5. Adjusting the Air Slide: Think of the air slide as a heat control. Fully opening it will give you the highest heat output. Adjust the slide to manage the heat level and control how fast the fuel burns.

6. Reloading the Fire: When you're ready to add more wood, check to ensure that the underside of the white baffles is white, indicating that the hardwood is fully alight. Open the air slide completely, slightly crack the door, and then add more wood to maintain both heat and airflow.

7. Overnight Burns: For longer burn times, fill the firebox with wood up to 50mm below the secondary air tubes. After 8-12 hours, reload with kindling and hardwood, and adjust the air control to balance burn time and heat.

By following these steps, you'll maximize the performance and efficiency of your KEMLAN CELESTIAL 900 Freestanding Fireplace with Fan and enjoy its warmth all season long.