Proper subfloor preparation is essential for a successful installation of your Style CN LVT-PS 2.5mm Vinyl Floor Plank. Follow these steps to ensure a suitable base: First, check the flatness of the subfloor. It should have less than a 1/8-inch gap over 6 feet and no more than a 1/16-inch gap over 1 foot. Correct any unevenness. Second, address any cracks or joints. Clean out any dirt or debris from cracks, saw cuts, and grout lines that are more than 1/8 inch wide or deep, and fill them with a commercial-grade patching or repair compound, following the product instructions. For concrete subfloors, make sure the surface is clean and free of any contaminants. Use a moisture-resistant leveling or patching compound if necessary, but avoid installation if you see any hydrostatic pressure. Concrete slabs should be fully cured (at least 28 days old) and surface dry. When dealing with wood subfloors, ensure they are dry and meet building code requirements. You might need to install underlayment-grade plywood. Keep in mind that plywood seams might become visible over time due to natural expansion and contraction. Gypsum subfloors need to be smooth, flat, dry, structurally sound, and free of contaminants; follow the primer manufacturer's instructions for preparation. If you're covering existing hard-surface flooring, use a moisture-resistant leveling compound to patch any tiles. Fill grout lines to avoid telegraphing or adhesion problems. Finally, if you're installing over a radiant heating system, make sure the heat doesn't directly contact the flooring and is set to the correct temperature. By taking these steps, you'll create the best possible foundation for your Style CN LVT-PS 2.5mm Vinyl Floor Plank, enhancing its performance and longevity.
