To ensure your VECTRON M4 POS system operates efficiently, here's how to charge its battery, as per the VECTRON M4 POS and Charging Station Instruction Manual:
Charging the Battery:
- Charge the battery in an environment between 5 and 35°C.
- The battery can be discharged in temperatures between -20 and +60°C.
- Store the battery ideally around 15°C. Avoid storing it for longer than three months without recharging.
- Ensure the battery is fully charged before starting the POS M4.
- A complete charge from empty takes approximately 4 hours.
Inserting the Battery into the POS M4:
- Only use a POS M4 battery to prevent damage.
- Loosen or remove the hand strap.
- Open the battery compartment by flipping up the metal tab on the cover latch.
- Turn the latch 90 degrees counterclockwise.
- Insert the battery into the compartment, contacts first, and press it down.
- Secure the battery cover with the metal latch.
- Retighten the hand strap if removed.
Charging the Battery in the POS M4:
- Place the POS M4 in the charging station slot.
- A red status LED indicates charging.
- A green status LED means the battery is fully charged.
Charging a Single Battery in the Charging Station:
- Place the battery in the charging station compartment, contacts first.
- Press down the battery.
- A red LED shows charging is in progress.
- A green LED indicates a full charge. Following these steps helps maintain your VECTRON M4 POS system's battery for optimal performance.
