Programming your Somfy SITUO 5 io/RTS remote to control your Somfy devices involves a few simple steps, but the process varies slightly depending on your equipment. Here's a breakdown:
-
For Somfy Remote-Controlled Lamp Holders or Sockets:
- Ensure the lamp holder or socket is powered on and disconnect other Somfy devices temporarily.
- Use the channel selection button on the SITUO 5 io/RTS remote to choose the desired channel.
- Press the programming button on the lamp holder/socket until its indicator light flashes.
- Press the PROG button located on the back of the SITUO 5 io/RTS remote.
- The indicator light on the lamp holder/socket will stay on, then turn off, confirming successful programming.
-
Adding a Remote Using an Existing Programmed Remote:
- On your existing Somfy remote, select the channel that controls the Somfy products you wish to add to the new SITUO 5 io/RTS remote.
- Press the PROG button on the existing remote until the devices' indicator lights flash.
- On the new SITUO 5 io/RTS remote, select the desired channel.
- Press the PROG button on the new remote. The device indicator lights will stay on, then go off, indicating successful pairing.
-
Programming a Somfy Roller Shutter or Hinged Shutter Drive:
- Partially open the shutter using the original Somfy control.
- Press the PROG button on the original control until the shutter moves up and down.
- Use the channel selection button on the SITUO 5 io/RTS remote to select the correct channel.
- Press the PROG button on the back of the SITUO 5 io/RTS remote. The shutter should move up and down, confirming the programming.
Always consult your specific device manuals for detailed instructions and troubleshooting tips. This ensures the best results for your Somfy SITUO 5 io/RTS remote control setup.
