Programming your Philips SRP3016S/27 remote control allows you to control multiple devices with a single device. Here's how to program it: You have two main methods Direct Code Entry and Auto Code Search. Direct Code Entry (Recommended): 1. Find the Code List included with your remote. Locate the codes for your device type (e.g., TV, DVD, Blu-ray). 2. Circle all the codes for your device's brand. 3. Press and hold the SETUP button on the remote until the red light turns on, then release it. 4. Press and release the device button for the device you want to control (e.g., TV, DVD). The red light blinks and stays on. 5. Enter the first 4-digit code you circled using the number buttons. The red light turns off. 6. Point the remote at the device and test the buttons. If it doesn't work, repeat steps 4 and 5 with the next code. 7. Repeat for each device. Auto Code Search: 1. Turn on the device manually. 2. Press and hold the SETUP button until the red light turns on, then release. 3. Press and release the device button for the device you want to control. The red light blinks and stays on. 4. Point the remote at the device, press and release the POWER button. The remote sends 10 codes; the red light blinks once per code. 5. Did the device turn off? If yes, go to step 6. If no, repeat step 4. 6. Turn the device back on. 7. Press and release the VOL UP button. The remote resends the first code. 8. Did the device turn off? If yes, you found a code; press the same device button to store it, then go to step 9. If no, press VOL DOWN until it turns off. Then, press the device button to store the code. 9. Test the remote's buttons. If they don't work, repeat the Auto Code Search. These steps summarize the Philips SRP3016S/27 Backlit Universal Remote Control User Manual. For detailed instructions, refer to the manual.
