How do I light and operate my Portway Arundel MK3 Multi Fuel Stove?

[OliviaDella]

Operating a Portway Arundel MK3 Multi Fuel Stove safely and efficiently requires following these steps:

Lighting Your Stove:

1. Make sure the ashpan is correctly in place.
2. Open both the primary and secondary air controls fully.
3. Build a kindling base in the center of the grate using roughly 1kg of kindling wood.
4. Place a single firelighter at the base of the kindling and light it.
5. Leave the door slightly ajar initially, but stay near the stove.
6. Once the kindling is burning well, close the stove door.
7. After about 5 minutes, or once the kindling is well lit, add three small logs, approximately 1kg total.
8. After these logs have caught fire, add three more logs, around 1.2kg.
9. Adjust the primary and secondary air controls to find the best heat output for your needs.

Refueling the Stove:

1. Fully open the primary air vent.
2. Add up to 1.2kg of wood or approved mineral fuel.
3. Close the primary air vent after about 2 minutes, or when the new fuel is fully aflame.
4. Refuel approximately every hour when operating at a high heat output.
5. Always refuel onto hot embers, and riddle the grate each time.
6. Avoid overloading the stove with fuel.

General Operation Tips:

• Never operate the stove with the door permanently open.
• Do not use the stove to burn anything other than recommended fuels.
• If you live in a smoke control area, adhere to all local regulations regarding fuel use, as detailed in the manual.
• Only burn dry wood or smokeless fuels to prevent excessive smoke emissions.
• Pay attention to the heat output and adjust the air controls to maintain control.
• Prevent overfiring by not leaving the air controls open for too long.
• If smoke enters the room, immediately address the cause before restarting the stove.

Maintenance:

• Regular cleaning and maintenance are essential for safety and efficient use of your Portway Arundel MK3 Multi Fuel Stove.
• Empty the ashpan after each use, and clean any ash or unburnt fuel from the grate and stove body.
• Have the flue, flue pipe, and chimney swept annually to reduce soot and tar buildup.
• Clean the stove door glass if it becomes stained.
• Ensure the throat plate is kept clean and free of debris. By following these instructions, you can enjoy safe, efficient, and effective use of your Portway Arundel MK3 Multi Fuel Stove.