Installing your ZEVNI A04802W4 Honaw 25 Inch Wide Vanity Light is a straightforward process when approached with safety and care. Here's a step-by-step guide: First, and most importantly, turn off the power at your home's main fuse or circuit breaker. Locate the correct circuit and switch it to the "OFF" position. Next, gather your tools. You'll need the necessary tools for assembly and installation as shown in the provided illustration in the manual; these are not included with the product. Carefully unpack your ZEVNI vanity light and verify all parts and accessories are present, as illustrated in the manual. Now, let's move on to the mounting plate installation. Pass the supply wires from the outlet box through the mounting plate (C) and secure the mounting plate to the outlet box using the provided mounting screws (A). After that, connect the wires according to the wiring diagram in the manual. Be sure to properly connect the ground wire and never connect other wires to the ground wire. Following the wiring, secure the back plate. Align the holes in the back plate (E) with the mounting plate (C) and secure them using the studs (F) that were previously removed. Next, install the glass shades and bulbs. Remove the socket rings (I) from the sockets (G), place the glass shades (H) on the sockets, and secure them with the socket rings. Install bulbs (not included) following the recommended maximum wattage on the socket. Finally, double-check your work. Ensure all components are properly installed before turning the light back on. Once everything is in place, you can restore power and enjoy your newly installed ZEVNI A04802W4 Honaw vanity light. For your safety, remember to follow all safety precautions and guidelines provided in the manual to reduce the risk of fire, electric shock, or personal injury. If you are not comfortable with any part of this installation process, consider consulting with a licensed electrician.
