Installing your new ZEVNI A04756W1 Ricco 10 Inch H Brass Wall Sconce is a straightforward process when following these steps. Always prioritize safety and consult the provided manual for detailed diagrams and specifications.
First and foremost, ensure the power is OFF. Locate your home's circuit breaker box and switch off the circuit that controls the light fixture. Additionally, turn off the wall switch associated with the sconce to double-check.
Next, gather your materials. Carefully unpack the ZEVNI A04756W1 Ricco wall sconce and verify that all parts are included. The instruction manual will have a complete list of components.
Now, connect the wires. Pass the supply wires from your wall through the mounting plate of the sconce. Secure the mounting plate to the outlet box using the provided screws. Consult the wiring chart in the manual to correctly connect the wires, paying careful attention to the ground wire. Ensure all connections are secure.
Then, attach the back plate. Align the holes in the back plate with the pre-assembled mounting screws on the mounting plate. Secure the back plate to the mounting plate using the provided nuts. Ensure the back plate sits flush against the wall.
After that, assemble the light fixture. Thread the provided pipe onto the arm of the sconce. Remove the socket ring, place the glass shade over the socket, and secure it with the socket ring.
Almost done! Install the light bulb. Insert a light bulb (not included) into the socket, making sure to use a bulb that does not exceed the maximum wattage specified in the manual.
Finally, test your work. Before restoring power, double-check all connections and ensure everything is securely in place. Once you've confirmed everything looks correct, you can restore power at the circuit breaker and wall switch. Your new ZEVNI A04756W1 Ricco 10 Inch H Brass Wall Sconce should now be illuminating your space. If you encounter any issues or have questions, refer to the customer service information provided with your purchase.
