Installing your ZEVNI A04687 Berton 38 Inch Wide Black Kitchen Island Light is straightforward when following these steps. Always prioritize safety and turn off the power at your circuit breaker before beginning.
Pre-Installation:
- Determine your desired hanging height and select the appropriate stem lengths (I).
- Thread the fixture wires through one side of the stems (I), and then attach the chosen stems to the top of the arm (J).
- Connect the quick links (H) to the loops (F) located on both the canopy (E) and the top of the stems (I).
- Pass the fixture wires through the loops (F) and the canopy (E).
Installation Steps:
- Turn off the power supply to the fixture at your home's circuit breaker or fuse box.
- Remove the nuts (G) from the mounting plate (C).
- Secure the mounting plate (C) to your outlet box using the provided mounting screws (B).
- If necessary, adjust the length of the fixture wires, ensuring they extend at least 6 inches above the mounting plate.
- Connect the wires according to the wiring diagram provided with your ZEVNI light fixture. Ensure a secure connection of the ground wire.
- Attach the canopy (E) to the ceiling by tightening the nuts (G) onto the pre-assembled screws on the mounting plate (C).
- Place the glass shades (M) onto the sockets (K) and secure them with screws (L).
- Install light bulbs (not included) into the sockets, ensuring you use bulbs within the recommended wattage specified for the fixture.
Final Checks:
- Carefully inspect all connections and components to ensure they are properly installed and secure.
- Restore power at the circuit breaker.
- Turn on the light fixture to enjoy your new ZEVNI A04687 Berton kitchen island light.
If you encounter any difficulties or have questions, consult the detailed instructions included with your ZEVNI light fixture, or seek assistance from a qualified electrician for a safe and successful installation.
