Installing your ZEVNI A04408 Mordy 22 Inch H Black LED Wall Sconce is straightforward. For safety, always turn off the power at your home's circuit breaker before you begin. Here's a step-by-step guide to help you: First, locate the instruction manual that came with your sconce, as it contains specific details and diagrams. Next, start the installation with these steps: 1. Preparation: Turn off the power at the circuit breaker. 2. Assemble the Mounting Plate: Unscrew the nuts (F) from the back plate (E) and set aside. Pass the supply wires from the outlet box through the mounting plate (D). Secure the mounting plate to the outlet box using the mounting screws (A). 3. Wire Connections: Connect the ground wires properly. Use the provided plastic wire connectors to twist the wires together, ensuring no wire strands are exposed. Consult the wire connection chart in your manual for proper connections. 4. Attach the Back Plate: Align the holes in the back plate (E) with the pre-assembled mounting screws. Attach the back plate to the mounting plate using the nuts (F) you set aside earlier. Make sure the back plate is snug against the wall. 5. Install the Shade and Adjust: Attach the glass shades (I) onto the sockets (H). Adjust the angle of light using the swivel joints (G). 6. Final Check: Before restoring power, double-check that all components are securely installed and aligned correctly. Refer to the ZEVNI A04408 Mordy's instruction manual for specific details or troubleshooting tips during the installation process.
