How do I install the WiseNeT ANE-L Series 2MP Turret Camera?

[Guzman]

Installing your WiseNeT ANE-L Series 2MP Turret Camera is straightforward. Here's a step-by-step guide:

1. Location Selection: Choose a suitable location, ensuring it can support the camera's weight and is shielded from direct sunlight, extreme temperatures, and conductive materials.
2. Camera Preparation: Disassemble the camera by twisting the base's groove counterclockwise and removing the middle cover.
3. Hole Drilling: Use the provided template to mark the drill hole locations. Position the template with the ' < > ' mark facing the desired monitoring direction. Drill holes according to the template's markings.
4. Camera Connection: Connect the camera's internal terminal to the corresponding cable.
5. Camera Mounting: Securely fix the camera using two tapping screws into the drilled holes.
6. Protective Film Removal: Remove all protective films from the camera lenses.
7. Monitoring Direction Adjustment: Adjust the pan, rotation, and tilt angles to your desired monitoring area. Consult the user manual for detailed adjustment instructions.
8. Reassembly: Replace the middle cover and rotate it clockwise until firmly locked, aligning the insert mark on the camera body with the interlock mark on the cover.
9. PoE Cable Connection: Connect the PoE cable to the camera's PoE connector. If the camera is outdoors, ensure the connection is properly waterproofed.
10. Power and Configuration: Connect the camera to a power source and configure the network settings to match your network configuration. You can use the Device Manager program to adjust the IP address and other network settings. For more detailed instructions and illustrations, please refer to the WiseNeT ANE-L Series 2MP Turret Camera User Manual.