Installing your TROY LIGHTING B6513 Morgan Outdoor Wall Light involves a few straightforward steps. Always prioritize safety by turning off the power at the circuit breaker before beginning. First, attach the mounting plate to your outlet box, ensuring the green ground screw faces the wall. Adjust the threaded stud to extend approximately 3/16 inch beyond the backplate. Next, connect the fixture wires to the electrical wires. Connect the white fixture wire to the white (neutral) wire in the outlet box using an approved wire connector (wire nut), and wrap the connection with electrical tape for added security. Then, connect the black fixture wire to the black (hot) wire in the outlet box, securing the connection. Once the wiring is complete, attach the backplate of the light fixture to the mounting plate and secure it. After this, install a 60W Type B lamp into the fixture, making sure not to exceed the recommended wattage. Finally, secure the glass panels: insert the center glass panel into the stainless steel frame, and slide the side glass panels into the frame's slots. Attach the frame to the backplate and secure it. After completing these steps, restore power at the circuit breaker. Remember to consult the TROY LIGHTING B6513 Morgan Outdoor Wall Light instruction manual for detailed diagrams and safety information. If you're uncomfortable with any part of the installation process, it's always best to consult a qualified electrician.
