
Installing the TROY LIGHTING B6512 Medium Sconce is straightforward when following these steps. First, attach the mounting plate to the outlet box, ensuring the green ground screw faces the wall. Adjust the threaded studs so they extend approximately 3/16 inch beyond the backplate. Next, connect the fixture wires. Attach the white fixture lead to the white wire in your outlet box using an approved wire connector (wire nut), and secure the connection tightly with electrical tape. Repeat this process for the black fixture lead and the black wire in the outlet box. Once the wires are connected, attach the backplate to the mounting plate using the center lock-up. Now, install the lamps, using a 60W type-B lamp and being careful not to exceed the recommended wattage. After the lamps are installed, carefully insert the Center Glass Panel into the stainless steel frame and slide the Side Glass Panel into the slots of the stainless steel frame. Finally, attach the frame to the backplate with the provided flat head screws. After completing these steps, restore power at the circuit breaker or fuse box. This process ensures a safe and correct installation of your TROY LIGHTING B6512 Morgan Medium Sconce.


