How do I install the Sentiotect 564-B Wood Door Handle, specifically the one with 200mm hole spacing?

[Ria]

Installing the Sentiotect 564-B Wood Door Handle with a 200mm hole spacing is straightforward. Here's a step-by-step guide:

1. Gather Your Tools: You'll need a screwdriver, measuring tape, and any hardware that came with your Sentiotect door handle.

2. Verify Hole Spacing: Double-check that the distance between the existing holes on your door is exactly 200mm to match the handle's requirements.

3. Mark the Position: Hold the Sentiotect handle against the door at your desired height. Ensure it's level, then mark the locations for the screws.

4. Drill the Holes: Using the correct drill bit size, carefully drill holes at the marked spots. Make sure the depth is appropriate for the screws provided.

5. Attach the Handle: Align the Sentiotect 564-B handle with the drilled holes. Insert the screws and tighten them until the handle is firmly secured to the door.

6. Final Test: Test the handle to ensure it functions smoothly. Make any minor adjustments if necessary.

For any challenges during the installation, refer to the Sentiotec GmbH instruction manual or reach out to their customer support for assistance.