How do I install the Sentiotect 564-B Door Handle Wood with 200mm hole spacing?

[Chris]

Installing the Sentiotect 564-B Door Handle Wood with a 200mm hole spacing is straightforward. Here's a step-by-step guide to help you: First, gather your tools. You'll likely need a screwdriver, measuring tape, and any hardware that came with the handle. Next, confirm the hole spacing. Double-check that the distance between the existing holes on your door is precisely 200mm to match the Sentiotect handle. Now, prepare your door for installation. Position the handle where you want it and mark the screw hole locations. Make sure the handle is level. Then, drill pilot holes at the marked spots. Use a drill bit suitable for the screws provided. Be careful to drill straight and at the correct depth. After drilling, attach the handle. Align the handle with the holes and insert the screws. Tighten them until the handle is secure but be careful not to overtighten. Finally, test the handle. Make sure it functions smoothly. If needed, make minor adjustments to ensure the handle operates correctly. For any further guidance, always refer to the Sentiotect 564-B Door Handle Wood instruction manual, or contact Sentiotec GmbH.