Installing the Sea Gull Lighting 65439 Academy Pendant Extra Large fixture? Here's a step-by-step guide to help you through the process, based on the manufacturer's instructions:
- Preparation: Determine the height you want the fixture to hang and assemble the stems. Screw the stems together, making sure to include at least one 12” stem for wiring space.
- Wiring Through the Stems: Feed the fixture wires through the stem assembly. Attach the stem assembly to the socket assembly.
- Canopy Prep: Thread the fixture wires through the strain relief and canopy. Slide the wires down the stem assembly.
- Mounting Plate Attachment: Pass the fixture wires through the threaded section and attach the mounting plate assembly to the stem assembly.
- Grounding: Connect the fixture's ground wire to a suitable ground source, following your local electrical codes.
- Neutral Wire Connection: Use a wire nut to connect the white fixture wire (usually square and/or rigid) to the neutral power line wire.
- Hot Wire Connection: Connect the black fixture wire (usually round and/or smooth) to the hot power line wire using a wire nut.
- Mounting Plate to Junction Box: Align and secure the mounting plate to the junction box.
- Canopy Installation: Slide the canopy and strain relief up to the ceiling. Tighten the strain relief.
- Bulb Installation: Install the appropriate lamp into the socket, paying close attention to the maximum wattage information on the socket label.
- Shade Attachment: Place the shade into the shade base and secure it with the shade screws. Be careful not to overtighten the screws to avoid breaking the glass.
Always refer to the instruction manual that came with your Sea Gull Lighting fixture for specific details, safety precautions, and any variations. If you have any difficulties or further questions, don't hesitate to contact Sea Gull Lighting's customer care center for assistance.
