How do I install the RAIN HARVESTING TATO10 True 90 Degree Tank Overflow Bends?

[LeAmelia]

Installing the RAIN HARVESTING TATO10 True 90 Degree Tank Overflow Bends correctly ensures efficient water management for your rainwater harvesting system. Here’s a step-by-step guide:

1. Using the Bend to Direct Water Away from Your Overflow:

   • Apply PVC solvent glue to the bend and attach it directly to your tank's overflow outlet, angling the bend in the desired direction.
   • Depending on the type of your overflow fitting (male or female), you might need an adapter to ensure a secure connection.
   • Connect the necessary pipework to the fitting, using PVC solvent glue to create a watertight seal.

2. Using the Bend as a High-Level Overflow:

   • Carefully mark the exact center point where the overflow bend will be placed on the tank.
   • Using a holesaw that matches the diameter of the bend, drill a clean hole at the marked location. Remove any debris or plastic shavings.
   • Insert the TATO10 bend through the hole from the outside, ensuring the bend is facing upwards.
   • Apply a generous amount of silicone sealant around the bend where it meets the tank to create a watertight seal and secure it in place.
   • Connect the appropriate pipework to the fitting, sealing with PVC solvent glue.

3. Maintenance:

   • A properly installed RAIN HARVESTING TATO10 overflow system typically requires minimal maintenance.

Remember to gather all the necessary tools and materials, which include a holesaw, marker pen, silicone sealant, PVC solvent glue, and primer. For additional assistance, detailed product specifications, or any further inquiries, please reach out to Rain Harvesting Pty Ltd at [phone] or visit their website at rainharvesting.com. The product manual also contains valuable information.