
Installing the RAB SUMO-R-12 Edge Lit Surface Mount XL Light with a J-Box is straightforward when following these steps. First, always ensure the power is OFF at the circuit breaker. Begin by preparing for the installation. Detach the mounting bracket by twisting and unlocking it from the surface mount. Align the bracket holes with the J-Box holes and mark the ceiling. Drill 12mm holes and secure the bracket using long screws. Then, attach the bracket to the J-Box using short screws. Next, slide the safety wire into the surface mount slot to support the fixture during wiring. Now, it's time to make the electrical connections. Select your desired CCT level using the switch. Connect the wires: white to white, black to black, and green to green or ground, using wire nuts to secure each connection. Raise the surface mount to the mounting bracket, pushing the wires through the hole into the J-Box. Finally, lock the fixture by turning it clockwise. For a polished and secure finish, caulk around the mounting surface with silicone sealant. Remember to consult the RAB SUMO-R-12 manual for visual aids and additional safety information. If you need further assistance, RAB provides a Tech Help Line at 888-722-1000 or visit their website for product details.


