Installing the Progress Lighting P560354-031 Winder 1-Light 12.75-in Black Outdoor Wall Light involves several steps to ensure a safe and proper setup. Here's a guide to help you through the process:
-
Preparation: Before you begin, ensure you have all the necessary parts according to the included contents diagram. You'll also need the following tools: Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, and a ladder. The estimated assembly time is about 30 minutes.
-
Assembly Instructions:
- First, loosely thread the screws (AA) and hex nuts (DD) onto the swivel mounting strap (CC). Adjust their length according to the depth of your fixture's canopy.
- Attach the swivel bracket to your outlet box using the provided mounting screws.
- Next, pass the screws (AA) through the mounting holes in the fixture canopy and adjust to expose 3/16" of threads.
- Tighten the hex nuts (DD) against the swivel mounting strap to secure.
- Using a wire stripper, remove 3/8" of insulation from the electrical wire ends. Connect the fixture wires to your supply wires using wire nuts (BB).
- Carefully slide the fixture over screws (AA) and tighten with cylinder nuts (EE) against the mounting surface.
- Now, attach the glass shade (B), socket cover (C), socket ring (D), steel ring (E), and finials (F) as instructed in the manual.
- Finally, install a lamp (not included) into the fixture socket. Use a 100-watt MAX incandescent medium base lamp, SBCFL, or SBLED.
-
Care and Maintenance: Always shut off the main power supply before cleaning the light fixture or changing the light bulbs. Clean the fixture with a damp cloth, avoiding abrasive or alcohol-based cleaners.
-
Safety Information: Prioritize safety by following all the precautions outlined in the manual. This includes turning off the electricity at the main circuit breaker panel before starting the installation. If installing the light fixture outdoors or in a wet location, make sure to seal it properly with latex waterproof caulking.
