How do I install the LNC Boheia 4-Light Distressed White and Rustic Bronze Bohemian/Global Beaded LED fixture?

[Brooks]

Installing your LNC A04837 Boheia 4-Light Distressed White and Rustic Bronze Bohemian/Global Beaded LED fixture involves several steps. Before you begin, always ensure the power is turned off at the circuit breaker for safety. Here's a guide:

1. Pre-Installation:

   • Attach the stem (O) onto the top of the sockets assembly (P).
   • Hang all wood bead strand-A (N) on the iron plate (M) and iron frame (Q).
   • Pass the fixture wires through the upper cover (K) and secure it with the loop (J).

2. Determining Hanging Height:

   • Measure and determine the correct number of chain links needed for the desired hanging height.
   • Using chain pliers, remove any excess chain links.
   • Attach the quick link (H) to the chain (I) and the loop (J) on top of the upper cover (K).
   • Thread the fixture wires through the chain (I), weaving them in and out of every other link, stopping just before the top of the chain. Ensure the wires are not strained.

3. Turn Off Power:

   • Locate your home's main fuse or circuit breaker box and switch off the power supply.

4. Installation:

   • Remove the collar ring (F) from the collar loop (G) and attach the single bar (C) to the outlet box using the mounting screws (B).
   • Raise the canopy (E) over the collar loop (G) and position the collar ring (F) to measure the correct position.
   • Pass the chain (I) through the collar ring (F) and then through the canopy (E).
   • Open the quick link (H), attach it to the collar loop (G), and pass the fixture wires through the collar loop (G) to the top of the pre-assembled threaded part.
   • Shorten the length of the fixture wires if necessary.
   • Make the wire connections according to the wiring diagram in the manual.
   • Raise the canopy (E) to the ceiling and secure it in place by tightening the collar ring (F) onto the collar loop (G).
   • Install the light bulbs (not included) and hang wood bead strand-B (T) on the iron frame (Q) and lower cover (S).

5. Final Checks:

   • Carefully inspect all connections and ensure everything is properly installed before turning on the light.
   • Once everything is confirmed, restore power at the circuit breaker and enjoy your new LNC Boheia fixture.

Always consult the instruction manual for the most accurate and detailed instructions specific to your fixture. If you are not comfortable with any part of the installation process, consider consulting a qualified electrician.