To ensure a safe and successful installation of your LITHONIA LIGHTING OFL1 LED THK LED Flood Luminaire, please follow these steps:
- Inspect the Fixture: Upon receiving your fixture, carefully check it for any signs of damage incurred during shipping. If any damage is found, report it immediately to the delivery carrier.
- Verify the Product: Compare the product description on your packing slip with the label located inside the luminaire's housing to confirm that you have received the correct model.
- Disconnect Power: Before you begin the installation process, it is crucial to disconnect the power source. Do not rely solely on a wall switch to turn off the power.
- Confirm Voltage: Double-check that the supply voltage matches the specifications indicated on the luminaire's label.
- Adhere to Electrical Codes: All electrical connections must comply with the National Electrical Code (NEC) and local regulations.
- Secure Wiring Connections: Use only UL-approved wire connectors to cap all wiring connections, ensuring a secure and safe setup.
- Protect Wiring: When mounting or supporting the fixture, be careful not to damage the outer jacket or insulation of the wires.
- Use Compliant Lamps: Ensure that you are using lamps that meet ANSI standards.
- Mounting Instructions: Follow the specific mounting instructions provided in the LITHONIA LIGHTING OFL1 LED THK LED Flood Luminaire's manual. This will vary depending on whether you have the Threaded Knuckle Mounting (OFL1 THK) or Yoke Mounting (OFL1 YK) model.
- Cleaning and Maintenance: Clean the fixture periodically using mild soap and water. Avoid using abrasive materials, and do not touch the LED components.
- Driver Access: The driver is pre-wired. However, in the event of a driver failure, access the driver compartment by unscrewing the socket head screws located on the back of the housing.
Following these steps will help ensure that your LITHONIA LIGHTING OFL1 LED THK LED Flood Luminaire is installed correctly and functions safely.
