To install the Knightsbridge ODA1FSB Odina Single Fixed Square Downlight, prioritize safety and follow these steps. First, adhere to all current IEE Wiring Regulations and Building Regulations. Always disconnect the mains power before beginning any installation or maintenance work. Consider the IP rating of the downlight to ensure it's suitable for your chosen location. Allow 50mm of clear space above and around the downlight for proper air circulation, and never cover it with insulation. This product is designed for indoor use only and requires earthing.
Here’s how to install the downlight:
- Provide power to the installation point.
- Cut a suitable hole in the mounting surface according to the cutout dimensions, avoiding any joists, pipes, or cables.
- Connect the luminaire to the mains supply, ensuring correct polarity: Live (brown), Earth (green/yellow), and Neutral (blue).
- Insert the terminal block bracket into the spring clip on the downlight and insert an LED GU10 lamp.
- Lift the spring clips on the sides of the downlight and gently push it into the ceiling.
- Turn the power on and verify that it's operating correctly.
For maintenance:
- Clean the downlight only with a soft, dry cloth; avoid harsh cleaning products.
- This downlight is dimmable, depending on the lamp you use.
- Recycle the product responsibly when it reaches the end of its life.
Warranty Information: The Knightsbridge ODA1FSB Odina downlight is covered by a 5-year warranty from the purchase date. The warranty is void if the product is installed incorrectly, used inappropriately, or if the batch code is removed. If a fault occurs during the warranty period, return the downlight to the place of purchase for a free replacement; however, installation costs for replacement products are not covered.
