How do I install the Inglesina Darwin i-Size Base in my car?

[DiKingston]

Installing the Inglesina Darwin i-Size Base in your vehicle ensures your child's safety. Here's a straightforward guide:

1. Preparing the Base:

   • Extend the support foot from under the base.
   • Fully extend the Isofix connectors using the release lever. Check that the anchoring indicators on the Isofix connectors are red; if they're green, press the button and pull the release lever to unlock them.

2. Securing the Base:

   • Connect the base's Isofix connectors to your car's Isofix anchor points. Listen for two "CLICK" sounds, confirming secure attachment.
   • Verify that the Isofix connector indicators turn green, confirming a proper connection on both sides.
   • Push the base firmly against the car seat's backrest until it rests flush.

3. Adjusting the Support Foot:

   • Use the lever to adjust the support foot's height until it firmly contacts the vehicle floor. Ensure it is locked in place.

4. Final Safety Checks:

   • Confirm the support foot indicators are green, showing correct positioning.
   • Make sure the support foot is firmly on the floor, even if the base lifts slightly.

5. Removing the Base:

   • Shorten the support foot using the lever.
   • Release the Isofix connectors from the car's anchor points by simultaneously using the button and the release lever.
   • Lift the base from the car seat and return the support foot to its storage position.

Always consult the Inglesina Darwin i-Size Base manual for detailed instructions and visuals. For any installation questions, contact Inglesina Customer Care for assistance.