Installing the FEIT Electric FP1X4-840-WH LED Flat Panel Fixture is a manageable project with the right tools and a little preparation. Always prioritize safety when working with electricity. Begin by turning off the power at the circuit breaker. Essential tools include a Phillips screwdriver, a power drill, and a 1/2-inch drill bit. The fixture package typically includes the 1x4 fixture, a mounting plate, 3/16-inch bolts and toggle nuts, wire nuts, and machine screws (#8-32 x 1 inch). Before you start, remember these crucial safety steps: Wear rubber-soled shoes, work on a stable wooden ladder, and ground the fixture to prevent shocks. Double-check all connections to ensure they're secure. Now, follow these step-by-step instructions: First, turn off the main power at the circuit breaker. Identify the wiring: Black is line voltage, white is neutral, and green is ground. Attach the mounting plate to the ceiling using the 3/16-inch bolts and toggle nuts, ensuring it's level and secure. Connect the fixture wires to the corresponding wires in the junction box using wire nuts, ensuring all connections are tight. Attach the fixture to the mounting plate with the machine screws (#8-32 x 1 inch) and make sure it's level and secure. Finally, turn the power back on at the circuit breaker and test the FEIT Electric FP1X4-840-WH LED Flat Panel Fixture to confirm it's working correctly. If you have any questions or need further assistance with your FEIT Electric 1X4 LED Flat Panel Fixture, contact their Customer Service Team at 1-866-326-BULB (2852) or visit www.Feit.com.
