To install your EUROfase LIGHTING 42703 Ilya LED Outdoor Post Mount correctly, follow these steps, also detailed in the included instruction manual. Safety is paramount, so always begin by disconnecting power at the circuit breaker or fuse box before any electrical work. Ensure all wiring adheres to local and national electrical codes, such as the National Electrical Code or Canadian Electrical Code. Use UL or CSA-certified wire connectors, appropriate for the wire gauge and number of conductors. You'll need a few tools: a flathead screwdriver, a Phillips screwdriver, pliers, electrical tape, and wire cutters. Wire strippers and a ladder are also helpful. The estimated installation time is about 15 minutes. Here's a step-by-step guide:
a. Connect the black wire (L) from your junction box (B) to the black wire (L) from the fixture (E) using a wire connector (H).
b. Connect the white wire (N) from the junction box (C) to the white wire (N) from the fixture (F) using a wire connector (H).
c. Join the green wire/bare copper (G) from the junction box (D) with the green wire/bare copper from the fixture (G) using a wire connector (H).
d. Secure the fixture to the post using the provided screws (A).
e. If your junction box has a ground wire, connect it to the bare copper wire from the fixture. If not, attach the bare copper fixture wire to the green ground on the crossbar.
After completing these steps and securing all connections, restore power and test the light to verify it's working correctly. Following these instructions will allow you to successfully install your EUROfase LIGHTING 42703 Ilya LED Outdoor Post Mount and enjoy your illuminated outdoor space.
