How do I install the C Series 4 Part Surround on my ENVIRO C60 Gas Fireplace

[Torres]

Installing the C Series 4 Part Surround on your ENVIRO C60 Gas Fireplace enhances its appearance. Here's how to do it: First, gather the surround pieces (top, bottom, left, and right) and the provided M5 cap screws (8) and M5 nuts (8). Assemble the surround by attaching the pieces together using the screws and nuts. Refer to the installation diagram for correct alignment, ensuring the notches on the left and right pieces face downwards and the top piece's slots are properly positioned. Tighten the screws securely with a 4mm Allen key. Next, remove the safety screen by lifting it off the hooks and pulling the assembly out. This will make installing the surround easier. Position the assembled surround by inserting the notched tabs into the forward-most slots on the ENVIRO C60 stove. Secure the surround to the stove using the fasteners located on the cabinet sides. Once the surround is in place, reinstall the safety screen by aligning its tabs with the slots in the stove. If you notice any warping after use, use self-tapping metal screws (not included) in the slots under the top surround piece for reinforcement. Remember to remove and reinstall the safety screen when adding the metal screws. Following these steps will help you successfully install your C Series 4 Part Surround on your ENVIRO C60 Gas Fireplace.