Installing your BROMIC 4500W Platinum Smart-Heat Electric Heater Series II requires careful attention to safety and electrical regulations. Here's a guide to help you: First, always have the installation performed by a licensed and authorized technician, adhering strictly to local electrical codes. When choosing a location, consider these mounting options: for commercial and residential spaces, wall-mount the heater at a minimum height of 1800mm (71") above the floor or ceiling-mount it at a minimum of 2400mm (96") above the floor. Avoid placing the heater directly below or in front of an electrical socket to prevent potential damage. Maintain a minimum safety distance of 1000mm (39.4") in front of the heater. For wall mounting, securely attach the provided wall bracket using appropriate fasteners. For ceiling mounting, use the supplied ceiling frame, following the instructions in the manual. Ensure proper clearance from combustible materials, as specified in the manual; this clearance is based on a surface temperature of 65°C (117°F) above room temperature. Connect the power supply according to the wiring diagram in the manual; consulting a qualified electrician is highly recommended for this. After mounting and electrical connections are complete, replace any guards or protective devices removed for servicing. Before use, inspect the heater to confirm it's in good working condition and that all safety devices are intact. For optimal performance and safety, it's recommended to have the heater inspected and serviced by a qualified, licensed service person at least once a year. For detailed diagrams and specific instructions, always refer to the BROMIC 4500W Platinum Smart-Heat Electric Heater Series II Instruction Manual.
