Ensuring your Amana W11603122A 20-inch white freestanding gas range is securely installed is crucial for safety. Here's a straightforward guide to installing the anti-tip bracket:
- Locate the Bracket: Begin by retrieving the anti-tip bracket, which is typically secured inside the oven cavity with a wire tie. Remove it.
- Choose Your Mounting Method: Decide whether to mount the bracket to the floor or the wall. If you have a stone or masonry floor, wall mounting is suitable. For mobile home installations, floor mounting is recommended to properly secure the range.
- Mark the Centerline: Identify and mark the centerline of the space where your range will be installed.
- Position the Bracket: Place the anti-tip bracket against the wall within the cutout. Ensure the V-notch of the bracket is positioned 7⁷⁄₈ inches (20 cm) away from the centerline.
- Drill Pilot Holes: Using a 1/8-inch (3 mm) drill bit, create pilot holes in the wall or floor, using the bracket holes as guides, corresponding to your chosen mounting method.
- Secure the Bracket: Attach the anti-tip bracket to the wall or floor using the screws provided.
- Prepare for Connections: Move the range close to the installation space to allow for gas and electrical connections.
- Remove Shipping Base: Eliminate any shipping base, cardboard, or hardboard from beneath the range.
- Final Placement: Carefully slide the range into its final location, making sure the rear leveling leg slides into the anti-tip bracket. This is critical for preventing tipping.
- Final Steps: Move the range forward slightly, onto the shipping base (if not removed already) to finalize the installation.
By following these steps, you will ensure the anti-tip bracket is properly installed, significantly enhancing the safety and stability of your Amana gas range.
