Installing your Adision Lighting OD5STRGBCW Up-Down Wall Sconce is straightforward when you follow these steps. First, ensure the power is off at the circuit breaker to prevent electrical hazards. For safety, consult a qualified electrician if you're not comfortable with electrical work. Begin by installing the included mounting plate into your electrical box using the provided screws. Next, connect the fixture wires to your home's electrical supply wires. Match the wires: white to white, black to black, and connect the copper or green ground wire to the green wire from the fixture or the electrical box. Use the provided wire nuts to secure these connections. Carefully tuck all wires back into the junction box after they are connected. Then, position the wall sconce over the installed mounting plate, aligning the mounting holes. Secure the sconce to the mounting plate by fully tightening the screws to ensure a stable fixture. For exterior installations, apply waterproof silicone sealant between the sconce's edges and the wall surface to prevent water ingress. Regarding FCC compliance, any unauthorized modifications could void your operational rights. This device adheres to FCC regulations and shouldn't cause harmful interference. Note that the equipment has been tested and complies with FCC rules for digital devices. To prevent radio interference, follow the provided instructions. If interference occurs, try adjusting the antenna's orientation, increasing the distance between the antenna and the receiver, or consult a professional. The equipment should be installed and operated with a minimum separation of 20cm between the radiator and the user's body to meet FCC radiation exposure limits. Following these steps ensures a safe and successful installation of your Adision Lighting OD5STRGBCW Up-Down Wall Sconce.
