How do I install my REELCRAFT CU6050LN CU Air Hose Reel?

[JulianaMarie]

Installing the REELCRAFT CU6050LN CU Air Hose Reel involves a few straightforward steps. Here's a guide:

1. Mounting the Reel:

   • Choose a suitable location, ideally a clean, dry workspace. Ensure the mounting surface (ceiling, wall, or floor) is sturdy enough to support the reel and hose.
   • Attach the handle to the link lever using the provided handle assembly.
   • Use appropriate hardware (3/8” bolts or 10mm bolts are recommended) to securely fasten the reel. Check to ensure it's firmly mounted.

2. Connecting to Your Air Compressor:

   • Apply Teflon tape or pipe compound to the swivel valve threads before threading it into the reel.
   • Apply Teflon tape or thread sealant to the built-in supply hose fitting on the reel. Connect this hose to the outlet of your air compressor.
   • Apply Teflon tape or thread sealant to the hose fitting threads. Attach the hose to the reel's swivel valve, then feed the hose through the flange opening.
   • Use a wrench to stabilize the swivel valve while tightening the hose fitting to prevent any damage to the valve.

3. Safety First:

   • Never exceed the maximum pressure rating of 250 PSI to prevent any damage to the hose reel.
   • Always wear proper eye protection during the assembly and operation of the hose reel.
   • Keep children away from the work area to prevent accidents.
   • Do not direct pressurized air towards yourself or others to avoid injury.

4. Warranty Information:

   • The REELCRAFT CU6050LN CU Air Hose Reel is backed by a quality guarantee. Within one year of purchase, if the reel malfunctions due to defects or poor workmanship, you can return it to the point of purchase for a free replacement or repair. Note that incidental or consequential damages are not covered by this warranty.

For more detailed instructions, please consult the REELCRAFT CU6050LN CU Air Hose Reel's instruction manual.