How do I install my new WiseNeT ANE-L Series 2MP Turret Camera?

[LuciaRose]

Installing your WiseNeT ANE-L Series 2MP Turret Camera is straightforward. Here's a step-by-step guide:

1. Location Selection: Choose a suitable location, ensuring the surface can support the camera's weight. Protect the camera from direct sunlight, extreme temperatures, and conductive materials.
2. Camera Preparation: Disassemble the camera by rotating the base groove counterclockwise and removing the middle cover.
3. Hole Drilling: Use the provided template to mark drilling locations. Position the template with the " < > " mark facing the desired monitoring direction. Drill holes according to the template.
4. Camera Connection: Connect the camera's internal terminal to the corresponding cable.
5. Camera Mounting: Securely fix the camera to the drilled holes using two tapping screws.
6. Protective Film Removal: Remove all protective films from the camera windows.
7. Monitoring Direction Adjustment: Adjust the pan, rotation, and tilt angles for your desired monitoring area. Refer to the user manual for detailed adjustment instructions.
8. Camera Reassembly: Replace the middle cover and rotate it clockwise until locked. Ensure the insert mark on the camera body aligns with the interlock mark on the middle cover.
9. PoE Cable Connection: Connect the PoE cable to the camera's PoE connector. Waterproof the connection if the camera is outdoors.
10. Power and Configuration: Connect the camera to a power source and configure the network settings according to your network. Use the Device Manager program to adjust the IP address and other network settings.

For more detailed instructions and illustrations, please consult the WiseNeT ANE-L Series 2MP Turret Camera User Manual.