Installing the HINKLEY 903760 60-inch Chisel Ceiling Fan involves a series of steps to ensure proper and safe operation. First, gather all necessary parts and tools, and protect the fan motor during assembly by working on a soft surface. Begin by installing the hanging bracket onto a UL-listed outlet box suitable for fan support, ensuring it's securely attached to a ceiling joist. Next, attach the downrod to the motor assembly after feeding the electrical wires through it, and then hang the fan onto the installed bracket. For added safety, connect the provided safety cable to the ceiling joist. Proceed with the electrical connections, carefully connecting the fan wires to the receiver unit and the ceiling wiring to the receiver using wire nuts, ensuring all connections are secure. Once the wiring is complete, tuck the connections into the ceiling outlet box and secure the canopy to the mounting bracket. Assemble the trim ring by aligning it with the canopy. Attach the fan blades to the motor using the provided screws, lock washers, and flat washers, tightening them to prevent noise. Finally, install the wall control by connecting the wiring to the wall transmitter unit and attaching it to the existing wall outlet box, followed by securing the wall plate. You can then use the wall control to set the fan speed, control the optional light, and adjust the fan's direction for summer or winter modes. Remember to follow the pairing process to synchronize the wall control with your HINKLEY fan. For any further assistance, consult the HINKLEY instruction manual or contact HINKLEY customer support.
