Installing the HI-CLOUD TLS360 Portable 3D Laser Scanner involves a few straightforward steps. Here's a guide to help you get started:
-
Battery Installation:
- Make sure the scanner is turned off.
- Insert the battery into the battery compartment of the scanner, following the arrow direction indicator.
- Push the battery gently until the buckle clicks into place.
-
Camera Installation:
- Ensure the scanner host is turned off.
- Attach the camera component to the top of the host, aligning it as indicated in the user manual.
- Secure the camera by tightening the screws on both sides by hand.
-
RTK Installation:
- With the scanner host still turned off, install the RTK components on top of the host, referring to the manual for correct alignment.
- Tighten the screws on both sides of the RTK component by hand.
-
Battery Compartment Installation:
- Place the battery compartment into the designated chute on the carbon fiber tripod, following the arrow direction.
- Push it down firmly until you hear a click, indicating it's securely fastened.
-
Host Installation:
- The scanner host should be off during this step.
- Place the host on top of the carbon fiber tripod.
- Align the center hole at the bottom of the host with the center hole of the tripod fixing platform.
- Secure the host to the tripod by tightening the hand nut at the bottom of the tripod fixing platform.
For detailed visual aids and further information, consult the HI-CLOUD TLS360 Portable 3D Laser Scanner User Manual.
