Installing your Heinner HTCH-F400IX Telescopic Cooker Hood is straightforward. Here's a step-by-step guide to help you get started:
Installation Methods:
There are two primary ways to install your cooker hood:
-
Wall Installation:
- Drill two 8mm holes at a suitable location on the wall, matching the center distance of the holes on the back of the cooker hood. Make sure to choose a level spot.
- Insert the provided nuts into the drilled holes.
- Insert screws into the nuts and tighten them securely.
- Carefully place the cooker hood onto the tightened screws.
- Secure the cooker hood further using the safety screws. These are located on the back casing and have a diameter of 6mm.
- Attach the one-way valve to the cooker hood.
-
Hanging Cupboard Installation:
- Drill four 6mm diameter holes at the bottom of your hanging cupboard.
- Attach the one-way valve to the cooker hood.
- Install the cooker hood onto the bottom of the hanging cupboard and fasten it using the four screws included with the hood.
Important Notes:
- An extensible pipe is an optional accessory and is not included with the cooker hood, so you'll need to source that separately if required.
- Before you begin the installation, remember to remove any protective film that may be on the cooker hood.
Following these instructions will help you successfully install your Heinner HTCH-F400IX Telescopic Cooker Hood and enjoy its features in your kitchen.
