How do I install my Cecily FR30600HBR Fredrick Ramond LED Wall Sconce

[AugustMarie]

Installing the Cecily FR30600HBR Fredrick Ramond LED Wall Sconce involves a few key steps. First, ensure you have a clean workspace and have unpacked all components. Carefully review the provided instructions before you begin.

1. Mounting the Sconce: a. Detach the mounting plate (A) from the backplate (C) by unscrewing the screws (E) on the backplate's side. b. Secure the mounting bracket (A) to your junction box (J) using two 8-32 screws (not included). Use a level to ensure the plate is perfectly plumb, with the threaded holes positioned correctly. c. Connect the wiring according to the specific instructions in the provided instruction sheet (I.S. 18).

2. Installing the Glass: a. Remove the outer sleeve (O) by carefully lifting it upwards. b. Loosen the set screws (S) on the side of the glass fitter (F) using the included Allen wrench. c. Insert the round end of the glass (G) with the neck into the glass fitter (F) and tighten the set screws to center the glass securely. d. Once the glass is stable, slide the outer sleeve over the glass and socket fitter.

3. Wiring and Grounding: a. For indoor installations, connect the positive supply wire (A) to the positive fixture lead (B), and the negative supply wire (C) to the negative fixture lead (D). b. For outdoor installations, follow the same wiring connections as for indoor fixtures. Apply silicone sealant to the connectors to create a watertight seal. c. Grounding instructions will vary depending on the fixture type (flush mount, chain hung, post-mount). Ensure the fixture ground wire (E) is properly connected to the power supply ground.

4. Safety First: a. Always cut off the power supply before beginning any electrical work. b. If you're unsure about any wiring aspects or if new wiring is required, consult a qualified electrician or your local electrical codes. c. Seal any gaps between the fixture mounting plate and the wall with caulk to prevent water intrusion. By following these steps from the manual, you should be able to install your Cecily FR30600HBR Fredrick Ramond LED Wall Sconce successfully.