How do I install hard drives in my Synology RS820+ NAS RackStation?

[LaDakota]

Installing drives in your Synology RS820+ NAS RackStation is straightforward. Here's a step-by-step guide:

1. Prepare the NAS Unit: Begin by powering off your Synology RS820+ and disconnecting it from the power supply. Locate the drive trays on the front panel of the unit.

2. Prepare Your Hard Drives: Whether you're using 3.5-inch SATA HDDs or 2.5-inch SATA SSDs, ensure they are ready for installation.

3. Install the Hard Drives: Carefully pull out a drive tray from the NAS. Insert your hard drive into the tray, making sure it aligns with the connectors. Secure the drive in place using the screws provided with the NAS or the drive itself. Repeat this process for each drive you intend to install.

4. Insert the Drive Trays: Slide the drive trays back into the Synology RS820+ until they click securely into place.

5. Power On the NAS Unit: Reconnect the power cable and turn on your Synology RS820+.

6. Initialize the Drives: Follow the setup instructions in the Synology user manual to initialize your new drives and configure your storage setup, such as setting up RAID.

7. Verify Drive Installation: Access the DiskStation Manager (DSM) interface to confirm that the drives are recognized and functioning correctly. This ensures your Synology RS820+ is ready for data storage and management. For any further detailed instructions or troubleshooting, always consult the official Synology documentation or contact Synology support.