How do I install Armorlite JL 4-Door Rock Sliders for my Jeep?

[CamilaRose]

Installing Armorlite JL 4-Door Rock Sliders on your Jeep involves several key steps. Here's a guide to help you through the process:

Before You Begin:

• Wear gloves to protect your hands.
• Ensure your Jeep is in "Park" with the emergency brake engaged.
• Having a second person assist with the installation is recommended.

Tools You'll Need:

• 10 mm socket for removing and installing the front sill nut and console bolt.
• Small standard screwdriver for removing and installing the front sill electrical connector and console plugs.
• T50 Torx head bit for removing and installing seat bolts.
• 16 mm wrench for removing floormat/carpet studs.
• Trim stick for prying plastic parts.

Installation Steps:

1. Protect seat side shields.
2. Remove both front and rear floor mats.
3. Remove the front sill, electrical connector block, and door harness connector.
4. Remove the front and rear seat bolts.
5. Remove the B-pillar (mid & lower sections).
6. Remove the rear console bolt trim covers.
7. Remove the rear console bolts.
8. Remove the front console bolt covers.
9. Remove the front console bolts.
10. Remove the rear carpet, if applicable, only for rear 11 installations.
11. Remove the front factory carpets.
12. Unscrew the plastic floor mat posts.
13. Remove the factory plugs (two front, two rear).
14. Install the rear Armorlite flooring, if applicable.
15. Install the front passenger side Armorlite flooring.
16. Install the front driver side Armorlite flooring.
17. Install the B-pillar.
18. Install the front sill.
19. Install the front and rear seat bolts to a torque specification of 48 newton meters.
20. Install the rear console bolts and trim covers.
21. Install the front console bolts and trim covers.

Armorlite Warranty Information:

Armorlite flooring products are backed by a limited lifetime warranty covering materials and workmanship. This warranty is valid for the original purchaser as long as they own the vehicle in which the product is installed. The warranty does not cover intentional damage, accidents, unreasonable use, neglect, improper installation, modifications, or damage that occurs prior to installation.

Warranty Claim Process:

To submit a warranty claim, visit the support page on www.GoArmorlite.com and complete the claim form. You may be required to provide images demonstrating proof of a manufacturing defect. Upon approval, a replacement product will be provided, and Armorlite will cover the shipping costs.

For more detailed instructions, consider watching the installation video available on www.GoArmorlite.com/installation.