Installing and wiring your Linmore LED AH1 Ace LED High Bay fixture safely and correctly is crucial. Here's a guide to help you, always referencing the included instruction manual for detailed steps.
First, always ensure that the installation adheres to the National Electrical Code (NEC) and all local electrical codes. This work should be performed by a qualified individual familiar with the product's construction and operation.
Safety is paramount:
- Before you begin, turn off the power at the circuit breaker to prevent electrical shock or fire hazards.
- Always wear appropriate Personal Protective Equipment (PPE) to protect yourself from sharp edges.
Wiring and Installation Steps:
- Grounding: Proper grounding is essential for safety. Make certain the fixture is correctly grounded.
- Voltage Compatibility: Verify that the voltage matches the fixture driver's requirements. Use approved connectors for all electrical connections.
- Suitability: Note that this fixture is not intended for use in wet or corrosive environments, nor should it be used with thermal insulation.
- Mounting: Follow the provided instructions for suspension or stem mounting, securely attaching the chain or cable to the building structure.
- Wiring: Wire the fixture according to NEC and local codes, making sure the power is off at the breaker. Refer to the driver wiring diagram for lighting controls.
- Accessories: If using the PIR Occupancy Sensor, refer to the manual for installation and programming using the remote control.
Maintenance:
- Never perform maintenance or cleaning while the fixture is energized. Disconnect power and allow the fixture to cool before maintenance.
- Maintenance must be performed by qualified electricians.
For any specific questions about wiring, installation, or use of the Linmore LED AH1 Ace LED High Bay fixture, contact Linmore LED directly at 559-485-6010 or email techsupport@linmoreled.com.
