Setting up your Timberk TEC.E31X M 1000 electric convector is straightforward. Here’s a detailed guide to get you started:
Installation:
Wall Mounting:
- Unpack the convector and wall-mounting kit.
- Select a wall location, maintaining adequate distances from other items and the floor.
- Mark the wall for drilling, noting the required height.
- Drill holes, insert dowels, and secure the mounting brackets to the convector using screws.
- Mount the convector on the wall, aligning screws with the brackets to ensure a secure fit.
Foot Installation (for freestanding use):
- Turn the convector upside down.
- Align the support feet with the holes at the bottom of the device.
- Insert the feet with wheels into the holes until they click.
- Confirm secure attachment before placing the convector on a level surface.
Connecting to Power:
- Verify that your power supply is single-phase 220V~/50Hz, matching the convector's specifications.
- Adhere to all electrical safety guidelines.
- Use a properly grounded outlet, rated for at least 10A.
- Keep the plug and socket dry to prevent electrical hazards.
Operation:
- The control panel features a dual-button switch for power modes and a thermostat dial.
- Press the buttons to activate either low or high heating modes.
- Use the thermostat dial to set your desired room temperature.
- To turn off the convector, set the power switch to “0” and disconnect it from the power outlet.
Maintenance:
- Regularly clean the exterior with a soft, damp cloth to remove dust and dirt.
- Avoid using abrasive cleaners or sharp objects.
- Clean the rear of the convector periodically to maintain its efficiency.
By following these steps, you’ll be able to easily and effectively install, connect, and operate your Timberk TEC.E31X M 1000, ensuring optimal performance and comfort in your space.
