To install the WISENET SHB-4301HP Box Camera Housing and connect your camera, follow these steps, referencing the user manual for detailed guidance:
-
Camera and Bracket Installation:
- Open the housing top with a 5mm wrench.
- Remove the camera plate and mount your camera, securing it with screws.
- Check and adjust the camera's lens and focus.
- Close and securely tighten the housing top.
- Attach the bracket to the camera mount using a 5mm wrench and tighten firmly.
-
Wiring:
- Consult the RJ45 Terminal Layout in the manual for proper input and output connections.
-
Specifications to Note:
- Input power: DC12V (Min 30W) & PoE (IEEE802.3at).
- Features: PoE, dustproof, waterproof (IP66), and constructed from Aluminium Die-Casting ADC 12 material.
- Operating temperature: -35°C to +50°C.
- Includes a fan, defroster, and heater; refer to the manual for their power requirements.
- Housing dimensions are provided in the manual.
-
Additional Recommendations:
- Use UTP (unshielded twisted pair) indoor cable for indoor installations. For outdoor use, STP (shielded twisted pair) cable is recommended.
- The maximum LAN cable length is approximately 100m, depending on the cable standards and resistance.
- Always adhere to the safety instructions in the manual to prevent damage and ensure safe operation.
By following these steps and the guidelines provided in your WISENET SHB-4301HP user manual, you can correctly install the housing and connect your surveillance camera.
