Installing a lightbulb in your ACCORD LIGHTING 7059 Wooden Slats Table Lamp is straightforward. Here's a step-by-step guide:
- Safety First: Always turn OFF the power at the circuit breaker before you begin the installation process.
- Prepare the Base: After unpacking all the lamp components, twist the lower support base clockwise.
- Locate the Socket: Identify the E-26 socket within the lamp's luminaire.
- Insert the Bulb: Carefully insert a standard E-26 lightbulb (not included) into the lampholder. Be sure the lightbulb does not exceed the maximum wattage of 25W.
- Secure the Base: Once the bulb is in place, reattach the support base to the table lamp, twisting it in the correct direction until it clicks into position.
- Optional Mounting: Use the included L drilling template to mark and drill holes if you plan to mount the lamp.
- Drill and Install Bushing: Drill the holes with an 8mm drill and insert the provided plastic bushing.
- Mount the Support: Secure the support using the provided screws into the plastic wall plugs.
- Attach the Bracket: Snap the bracket to the L.
- Power Up: Plug the lamp into a working electrical outlet.
- Test It Out: Turn ON the electrical power at the circuit breaker and use the lamp's switch to test if it works. Your ACCORD LIGHTING 7059 Wooden Slats Table Lamp is now ready to illuminate your space. Should you face any difficulties, consult a qualified electrician.
